| Description | Unit |
| Pressure rating at 8 ℓ/sec (max) | 250 bar working pressure |
| Length of gun | 715 mm |
| Width of gun | 850 mm |
| Mass of gun | 10.2 kg |
| Clamping height | 0.75 m (min)1.6 m (max) |
| Mass of Cannon prop | 24 kg |
| Standard nozzle size | 8 mm |
| Water consumption | 6 to 8 ℓ/sec (standard) |
| Reaction force at 8 ℓ/sec | 112 kg force |
Panel Cleaning Tool
The Panel Cleaning Tool has a high impact force and is used in a stoping environment to move broken rock down dip into a gully typically over a distance of a 25 to 30 m panel (length of face in conventional South African mines). No cleaning scraper is required when this device is used.
- Panel Cleaning Tool is attached to an anchored prop to reduce operator fatigue
- Effective over 5 m range
- Pull back trigger will automatically close if the anchor prop becomes dislodged
- Two safety latches on trigger
- Dry shut off
- The gun incorporates an inlet strainer
- High efficiency tungsten carbide nozzle provides a coherent jet