PRODUCT RANGE DRILLING EQUIPMENT
  DRILLING EQUIPMENT

MONORAIL INCLINE DRILL RIG & TRANSPORTER

PURPOSE

To do blast hole face drilling and roof bolt holes of max 2,4m long in a narrow inclined raise / gully of up to 35 degrees.

Secondly to transport equipment and material up the raise / gully.

FEATURES
  • Drill Rig for developing narrow inclined raises
  • Rack and Pinion power transmission
  • Load tray for transporting equipment and material
  • Operation from tethered hose
  • Pipe rack suspended from cable anchor
  • Use as platform for charging holes and installing cable anchors
  • Water operated 180 Bar
  • Remote control travelling mode

SPECIFICATIONS

Travel limitation

Horizontal
Incline

0 degree
up to 35 degrees
Turning circle 2,5m radius min

Raise size

Width
Height

1.8m min - 2.1m max
2.8m min - 3.2m max

Nominal travelling speed

0.3m/sec

Drill speed

80 sec for 1m
Pipe rail (Rack) Length
Weight 		1.5m
44kg
Length of hole 2.4m max
Thrust force of drill 280 kg
Water consumption of monorail drive unit at 18 MPa pressure 0.3 l/sec
Water consumption of rock drill thrust drive unit at 18 MPa pressure 0.3 l/sec
Water consumption of drill at 18 MPa pressure 1 l/sec
Power source - hydropower 14 - 18 MPa

Please Note:

  • In the interest of improving products HPE reserves the right to change any specifications without notice
                 
| Back to top | | Print Page | | Send this page to a friend |